Hey-hey! Kali ini langsung aja ku, zhil, bahas apa yang harus dilakukan (1) sebelum, (2) saat, dan (3) setelah hari pengisian Formulir Rencana Studi (FRS) di ITB. Daftar isi Apa itu FRS? Mengapa harus mempersiapkan FRS? Apa yang penting diketahui ketika FRS? Mata kuliah pilihan ada yang rebutan? Sebelum hari-H…

In THIS ARTICLE, I will show you how I developed a system based on the ESP32 microcontroller and its web server properties to measure room temperature and use the results to control the activation of a fan (which will be modeled by an LED), while also installing a manual control…

In THIS ARTICLE, I will show you my experiments using Bluetooth to exchange data between my phone and EPS32 to perform various functions. This project is part of a course in embedded systems guided by the excellent Dr. Kusprasapta Mutijarsa, S.T, M.T. of the Bandung Institute of Technology (ITB). Prerequisites …

In THIS ARTICLE, I will tell you about my attempt to fix a problem with using I2C LCD that has plagued two of my previous projects: that of the dim display. I will then use it to display BME280 measurements in the LCD. This project is part of a course…

In THIS ARTICLE, I will show you my exploits using ESP32, LCD, and the PWM concept. This little project is carried out under the guidance of the excellent Luqman Muhammad Zagi, S.T., M.T. of the Bandung Institute of Technology. Prerequisites An ESP32 microcontroller, along with its vertebrate A 16×2 LCD…

In THIS ARTICLE, I will show you how I measured my room’s temperature, humidity, and pressure and display it on an LCD using ESP32. This little project is carried out under the guidance of the excellent Luqman Muhammad Zagi, S.T., M.T. of the Bandung Institute of Technology. Prerequisites An ESP32…

In THIS ARTICLE, I will show you some of my experiments and projects with ESP32’s inbuilt sensors — that is, sensors that are already built into your ESP32 board without any additional prerequisites. These inbuilt sensors are: Temperature sensor. It has to be noted that this internal temperature sensor doesn’t…

In THIS ARTICLE, I will show you how I designed and constructed a simple ESP32 circuit to receive, process, and display digital inputs and output, using LED and pushbuttons, to create a model traffic light. This little project is part of a course in embedded systems guided by the excellent…

In THIS ARTICLE, I will show you how I used the ESP32 microcontroller to blink both an internal and external LED. This little project is part of a course in embedded systems guided by the excellent Dr. Kusprasapta Mutijarsa, S.T, M.T. of the Bandung Institute of Technology (ITB). Prerequisites To…